Spectroscopy
Fluorescence Spectrophotometer (Spectrofluorometer)
Shines light of one wavelength on a sample and measures the longer-wavelength light the molecules give back (fluorescence). Very sensitive and selective for fluorescent compounds.
- Pharmaceutical
- Biotech
- Clinical
- Environmental
- Food & beverage
- Research
PREVENTIVE MAINTENANCE
Maintenance checklist
Daily / each use
- Clean cuvettes
- Check sample compartment for spills
- Run a quick water Raman or reference check if required by SOP
Weekly
- Wipe the sample compartment
- Check the cuvette holder alignment
Monthly / quarterly
- Check lamp hours and intensity
- Inspect cuvettes for scratches
Six-monthly / annual
- Wavelength accuracy and sensitivity calibration
- Preventive maintenance by service engineer, including lamp replacement when needed
SAFETY
Safety precautions
Before you work on the Fluorimeter
- Xenon lamps emit intense UV light and are under high pressure; replace them only when cold, wearing face protection.
- Never look into the beam or sample compartment with the lamp on.
- Handle organic solvents and fluorescent dyes with gloves; some dyes are toxic or mutagenic.
- Dispose of quartz cuvettes and solvent waste as per site procedure.
In LimsPulse · Calibration Management
Keep every Fluorimeter in control: usage logs, calibration and maintenance schedules, and automatic blocking of overdue instruments.